ToneXone mini pedal

[Billy Murdoch]

Has anyone had success with this pedal?
I found it extremely awkward and frustrating to set up and eventually gave it F.O.C. to a friend who tried it for a while and is now ready to bin it.
Best regards
Billy

[Ron Hogan]

Billy, are you speaking of ToneX one?

[Bill Davis]

I use it exclusively. However you need Joe Rogers amp samples, an Airstep TX to choose patches and a sonicake DI with Joe's speaker IR's in order to get a good sound for steel. On its own, some of the stock Tonex patches are OK but are not made for the steel. Without the Airstep you are limited to 2 patches (or is it 3?) I am on an ampless stage and my rig as described is the first I've had that actually sounds like a steel in my in ear monitors

[Jon Jaffe]

I have had success with the TONEX One (the mini pedal). I have it clipped to the right leg of my steel. I can comfortably access 4 presets. I also use Joe's models, though I use his cabs in the TONEX amplifier. The TONEX One can go directly to the board if needed.

[Billy Murdoch]

Many thanks for Your replies Gents.
My friend has persevered with the pedal and has managed (with difficulty) to sucsessfully get things going. He has a few of Joe Rogers captures and speaks very highly of the Dobro effect.
Best regards
Billy